Adjustable Spanners

Jenkins, quick adjustment spanner

admin — Fri, 03 Jun 2011 12:18:13 +0000

This is a design where the sliding jaw engages on a rack on the handle, to adjust just push the jaw forward and slide.
Samuel James Jenkins of Alma Cottage, Albert St, Bury got the design patented in 1895

The spanner has no makers mark but does have signs of being made from wrought iron so indicating its age

GB189504164A patent pdf

S.C.H. & K G.m.b.h.

admin — Wed, 29 Sep 2010 14:06:39 +0000

Found on EBAY an unusual quick adjust wrench that looked to be a gear head on the ebay auction but on arrival it has a bar link in the head from the end of the handle to the movable jaw

Denna

admin — Wed, 29 Sep 2010 14:03:43 +0000

Found on EBAY a small wooden handled adjustable

Markings not fully readable but seem to be
DENNA DE
AF & AI

the & above could well be something else like a logo

Skylux

admin — Sat, 14 Aug 2010 17:44:32 +0000

Spanner has a UK patent 157284 number on it, granted to Julius Kind and Willy Kreinberger of Bergstasse Mehli, Thuringen, Germany it is not well forged but has a different head outline to the patent

Webmore (Birmingham) and Company Ltd

admin — Fri, 06 Aug 2010 19:55:34 +0000

Webmore (Birmingham) and Company Ltd were located at 10 Camp Lane, Kings Norton, Birmingham 30
They made a small cheap to make adjustable that was made of only 4 parts, the folded sheet handle a two pressed out jaws and a worm.
They obtained a patent also in the name of Ivor Richard Harris who worked at the company.

My example is marked Prov Patt which dates it to the period Dec 1947 (application date) to March 1950 when the patent was granted.

ATC or ATL adjustable spanner

admin — Wed, 04 Aug 2010 21:35:46 +0000

This one is taking some discovering at the moment, it has the following stamped in the recess as far as I can tell.
AT C MARCH 26 1895 but it could be AT L MARCH 26 1895

Thanks to Stan I now have the design patent but it is from Design 29520 Oct 18 1898 by a Charles Metz, probably a case like another spanner I have where they were keen to manufacture but the paperwork takes too long so they just start manufacture with something such as an application date on the tool.

Mauser Adjustable Spanner (Engländer, verstellbarer Schraubenschlüssel)

admin — Wed, 04 Aug 2010 20:48:06 +0000

I got this on Ebay, very little wear but does have some damage to the worm which after a little investigation is a basic design fault, there is a turning moment that rotates the worm out of mesh when the force is applied, this can be demonstrated with just finger force on the moving jaw.

I dont have a date yet for the spanner but I do have an English patent dated 1948 which does not mention Mauser at all but the patent is so similar to the tool that its a copy or… will someone tell me.
Patent 606388 Littleales and Levison

The Lovell Wrench Co

admin — Wed, 04 Aug 2010 18:40:37 +0000

They made an adjustable wrench that was supposed to be cheap and light it was patented by
Albert Kingman Lovell, May 12 1896 No 559901.

The example I have found differs in the way the worm is attached.
They failed to think too hard about where they stamped the name on the front and patent details on the back, both are on the upper jaw joggled bend.

Easterbrook, Allcard Co Ltd, Sheffield

admin — Tue, 20 Jul 2010 18:04:31 +0000

In 1843 a young Sheffield mechanic named John Easterbrook began working for himself. By 1852 he had entered into a partnership and traded as the firm of Easterbrook & Scatchard working as toolmakers and machinists in Suffolk Road. Two years later the firm was known as Easterbrook, Scatchard & Drury, and at its Albert Works in Suffolk Road was making ratchet braces, hammers, spanners, screw stocks, taps and dies, lathes and all kinds of tools made to order.

Around 1858 the name changed yet again to Easterbrook and Allcard with premises in both Leadmill Road as well as Suffolk Road. In the following years the business expanded its range of products significantly, not least into making railway tools in addition to existing markets.

The business became a limited company Easterbrook Allcard & Co Ltd in October 1897 with Harry Allcard, James Allcard’s son, becoming chairman.

By the time of James Allcard’s death the once small enterprise had become a substantial concern with fine offices, a number of turning shops, an erecting shop and a number of smithies. Contracts for the firm’s output had been obtained from such prominent clients as the British Admiralty, the War Office, the India Office, railways both at home and abroad, and even the German Navy was buying Easterbrook Allcard tools. And what tools. Made for engineers, boiler makers, smiths, ship builders and plate layers the range of tools now produced was truly
astonishing. The firm’s 26th catalogue published in 1900 lists around 200 different hand tools being
offered for sale in addition to the company’s machine tools.

They used the name PRESTO as a trademark and later the company became Presto International Limited

Wooden handled adjustable spanners

admin — Sat, 17 Jul 2010 10:19:08 +0000

These are often American made as most of my examples where I can read the makers name.